Ease Your Pain
The patent pending jaw and lever mechanism allows you to pull stakes and posts straight up out of the ground or sub-grade without bending them, keeping your expensive stakes straight for hundreds of repeated uses.
Pulling straight up is easier, because it eliminates side loading, and resulting strain on the operator's back. Using the JackJaw® extractor is safer than using a hammer and striking the metal stakes to loosen them. And is much less expensive than using two guys and a bobcat to pull tent stakes and posts.
Gripping Force
The gripping jaws of the JackJaw® extractor are made from case hardened AR400 steel that will last for thousands of pulls. When it is necessary, they are easily replaced in the field using common tools to install the new jaws.
Made to Last
JackJaw® Extractors are made from heavy gauge steel plate and tubing to withstand everyday job site use. Two holes in the 4" by 8" base plate allow you to attach it to a board for an even wider base for working in soft conditions. No paint to chip. JackJaw® has a clear zinc plating for lasting durability that will resist corrosion.
Mechanical Advantage
The JackJaw® 100 and 200 multiply force by 9 times. A 50 pound down force on the handle generates a massive 1050 pounds of gripping force and 450 pound upward breakout force on the stake. Need more force? Just push a little harder to get even the toughest pins or stakes out in one stroke. See table below:
Handle
Force (lbs)
Gripping
Force (lbs)
Breakout
Force (lbs)
50
1050
450
100
2100
900
200
4200
1800
Tent stake extractors have a 16 to 1 mechanical advantage. A 100 pound down force on the handle generates a 1,600 pound upward force and a 3200lb gripping force on the stake or post.
Public Works Products
JackJaw® 300 removes "U" pickets and utility grounding rods
JackJaw® 304 removes square sign posts
JackJaw® 305 removes round sign posts
Agricultural Products
JackJaw® 203 removes "T" fence posts
Construction Products
JackJaw® 100 removes 3/4" and 7/8" concrete form pins, stakes and string line stakes, and drill rods for nuclear density gauges
JackJaw® 200 removes 3/4" and 7/8" concrete form pins, stakes, string line stakes and "T" fence posts, and drill rods for nuclear density gauges
JackJaw® 201 removes 7/8" to 2" flat stakes and 7/8" to 1" round stakes
Tent Products
JackJaw® 301 removes 3/4" to 1 1/4" tent stakes and rebar
JackJaw® 302 removes 3/4" to 1 1/4" tent stakes and rebar. Adjustable base eliminates the need for a block to raise the base when utilizing the AC0004 for removing stakes from stake bars and flat base plates
JackJaw® 501 removes 3/4" to 1 1/4" tent stakes and rebar in the toughest conditions. Ground with heavy frost found in Alaska, and the Kalichi clay found in Arizona and other states.
JackJaw® 502 removes 3/4" to 1 1/4" tent stakes and rebar in the toughest conditions. Ground with heavy frost found in Alaska, and the Kalichi clay found in Arizona and other states. Adjustable base eliminates the need for a block to raise the base when utilizing the AC0009 for removing stakes from stake bars and flat base plates.
AC0004 Tent Stake Adapter is used with the JJ0302 when removing stakes that are flush with the ground, stake bars or flat base plate.
AC0009 Tent Stake Adapter is used with the JJ0502 when removing stakes that are flush with the ground, stake bars or flat base plate.
